LOCTITE EDAG 479SS E&C

Harmonization Code : 3506.91.90.99 |   Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg ; Adhesives based on polymers of headings 3901 to 3913 or on rubber; Other ; Other
Main features
  • Good conductivity
  • Screen printable
  • Superior adhesion to polyester film

Product Description

LOCTITE EDAG 479SS E&C is a halogen-free, conductive silver ink with good flexibility. It is suitable for screen printing and often used for printing circuits, crossovers, EL-lamps and sensors on polyester foil.

LOCTITE EDAG 479SS E&C is compatible with Electrodag dielectric and carbon inks. Further it can be blended with the carbon ink LOCTITE EDAG 965SS E&C to adjust resistance levels and to make the material more economical.

 

Recommended drying schedule

  • 15 minutes @ 93°C

 

Product Family
479SS  
1Kg Jar

Catalog Product

Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 8 - 12 weeks Shipping in 8 - 12 weeks Shipping in 8 - 12 weeks
Packaging
TDS, SDS & Technical documents

Technical Specifications

General Properties
Solids 74.6 %
Physical Properties
Viscosity
Viscosity
Viscosity is a measurement of a fluid’s resistance to flow.

Viscosity is commonly measured in centiPoise (cP). One cP is defined as
the viscosity of water and all other viscosities are derived from this base. MPa is another common unit with a 1:1 conversion to cP.

A product like honey would have a much higher viscosity -around 10,000 cPs-
compared to water. As a result, honey would flow much slower out of a tipped glass than
water would.

The viscosity of a material can be decreased with an increase in temperature in
order to better suit an application
 20,000 mPa.s

Additional Information

DIRECTIONS FOR USE 

1. Do not expose wet ink to direct sunlight. 
2. Do not freeze. 
3. Keep product container tightly closed when not in use. 
4. LOCTITE EDAG 479SS E&C is supplied ready for use. Should thinning become necessary, dilute 2% by weight with Carbitol acetate. 
5. LOCTITE EDAG 479SS E&C should be thoroughly stirred prior to use. Avoid rapid stirring as this causes air entrapment.